Dissolved air floatation machine is used to treat water with low turbidity, high color, high organic content, low oil content, low surfactant content or algae-rich water. So how do we proceed with it

Installation, the next step is to introduce the steps for you.

 1. Before installing the dissolved air floatation machine, the foundation needs to be compacted. And use concrete mortar pad height 100-150mm. It can also be installed overhead, but the foundation needs to bear the weight of the equipment during operation.

　　 2. The level needs to be adjusted after the dissolved air floatation machine is in place.

　　 3. The connecting pipeline between the sewage inlet and the reaction tank should be as short as possible to prevent the flocs from being damaged in the pipeline.

　　 4. The clean water outlet can be connected to the sewer to discharge. If you need to enter the next process, you can directly connect with the sewer treatment equipment.

　　 5. Sludge outlet can be connected to sludge tank or sludge treatment equipment.

　　 6. Dissolved air floatation machine needs to be equipped with a sewer for cleaning. Open channels can be dug, or it can be directly connected to the regulating tank by pipeline, so that the water for flushing the air floatation tank is discharged.

　　 7. The electrical box should generally be placed on the side of the escalator, and the environment should be clean and clean.

　　 The above are the installation steps of the dissolved air floatation machine. When we install and use, we must start step by step in accordance with the steps. Do not rush to seek success and cause damage to the machine.