Dissolved air flotation machines are used to treat water with low turbidity, high color, high organics, low oil or algae.
It is very important to use the correct operating procedure to improve the effectiveness of water treatment. I will
introduce you in detail.

1.First, check the power supply circuit of the flotation machine, perform a no-load test operation for a short time,
judge whether the pump and the air compressor are rotating properly, and if there is noise or heat, within the time
You need to deal with it. After injecting outside air into the stirring device of the dissolved air floater, determine if
the direction of rotation is correct. Jog the scum to see if it's spinning correctly and for any collisions or instability.

2. Clean the dissolved air flotation equipment and required pipelines and make sure the connecting parts are not
loose and the rotating parts have sufficient lubricating oil.

3. Turn on the power switch of the drug dissolver and stir until the concentration of the drug solution becomes
uniform.

4. Add the appropriate amount of flocculant, depending on the raw water treatment capacity, and add it to the
corresponding scale of the dosing pump.

Dissolved and above is the operation rule of the dissolved air levitation machine, and it is very important to pay
attention to safety because it is necessary to perform detailed maintenance in all processes from startup to trial
operation to normal operation of the equipment.